Are you doing a remodel project? You’ll need to learn about phases. There are 3 dialog boxes you’ll have to become more familiar with.
1. Phase Settings: Under Settings... Phases... you will find Project Phases, Phase Filters, and Graphic Overrides.
Project Phases: Here you can add new phases to the project. The best practice is to set these up before you begin work on your project. Later Phases are ok to add at a later date but you cannot rearrange the order of phases after entering them. Revit is setup by default with Existing and New Construction phases.
Phase Filters: Here you can control the graphics used for objects who’s relative phases are set to New, Existing, Demolished, or Temporary. Phase Filters will determine whether the Category’s Object Styles are used or whether Revit will use the Graphic Overrides established under the Graphic Overrides tab. You should leave these alone until you grasp an understanding of them.
2. View Properties: Every View has View Properties (VP). In the view properties you will find the Phase and Phase Filter used for that particular view. It is very important that you setup duplicate views for each phase (Existing and New Construction).
Phase: Revit’s views are setup by default with the New Construction Phase. This simply means that all objects placed in this view will automatically be set to New Construction and will show. If you plan on using a remodel project to learn Revit (or teach someone Revit) make sure you setup all the view's phases to Existing before you start. This way you don’t have to think about what phase you’re placing an object in and you won’t have to switch all of the objects from New Construction to Existing after the model has progressed. Once you’re ready to move on to the addition then you can add new views and set their phases to New Construction.
Phase Filter: Revit’s views are setup by default with Show All phase filter. We typically change this to Show Complete. The chosen phase filter will determine how objects that are New, Existing, Demolished, or Temporary (relative to the active phase) will display. Goto Settings... Phases... Phase Filters to view and modify how phase filters affect the display of objects.
3. Object Properties: Under the properties of most objects you will find Phase Created and Phase Demolished.
Phase Created: In what phase was the object created? For example, when you place an object into a view that is set to the Existing Phase the object's properties will automatically reflect that the object was created in the Existing Phase. If the view’s phase is set to Existing and you change the object’s Phase Created to New Construction the object is still there but will disappear from view because the view is setup to only show objects placed in the Existing Phase.
Phase Demolished: In what phase was the object demolished? Very simply if you demolish an Existing object in the New Construction phase the object will display as dashed lines in views who’s phases are set to New Construction. However, the object will still display as whole in views who’s phases are set to Existing.
This blog will highlight some of the common questions and cool tips found in the process of transitioning our office to Revit. This site is not sponsored or endorsed by, or affiliated with, Autodesk, Inc.
Thursday, March 02, 2006
Wednesday, March 01, 2006
Revit Resources
Did you buy a revit subscription? You should have access to 100 class sessions recorded at AU 2005 in Orlando. Just login to the Autodesk Subscription Center and click on AU Online 2005. You might have to reset your password with Autodesk if you don't remember it... it's worth it. Other great tutorials are available at DGCAD. If you're having a problem you can't solve you can also file a support request with AutoDesk. Go to Help... Create Support Request. They usually respond within 2 hours. Their support is excellent.
Are you looking for Revit Families online? Go to File... Load from Library... Load Family... and click on Web Library or you can try Symbol Machine and RevitCity's Family Explorer.
Want to ask other Revit users how to accomplish something? Signup for forums at AUGI and RevitCity.
Are you looking for material textures online? Goto Google and type... download textures. http://astronomy.swin.edu.au/~pbourke/texture/
You found this blog so I assume you can find many of the other blogs that are available online. Feel free to comment on your favorite resources.
Are you looking for Revit Families online? Go to File... Load from Library... Load Family... and click on Web Library or you can try Symbol Machine and RevitCity's Family Explorer.
Want to ask other Revit users how to accomplish something? Signup for forums at AUGI and RevitCity.
Are you looking for material textures online? Goto Google and type... download textures. http://astronomy.swin.edu.au/~pbourke/texture/
You found this blog so I assume you can find many of the other blogs that are available online. Feel free to comment on your favorite resources.
Friday, February 17, 2006
Plan Regions
Do you have windows that don't show in plan view because they are too high above the cut plane? Do you have a fireplace opening that doesn't show because it's too far below the cut plane? Use the Plan Region Tool in your View Tool Palette. With this tool you can set a unique view range to include objects above or below the cutting plane that's set in the given view.
Once plan regions are placed they can often be difficult to locate. Select one you can find and Edit it. You'll notice that all the other plan regions are now visible.
Once plan regions are placed they can often be difficult to locate. Select one you can find and Edit it. You'll notice that all the other plan regions are now visible.
Thursday, February 16, 2006
Split Face and Paint Tools
Does your floor material transition from carpet to tile and you want to show the change in material in your floor plan view? Use the Split Face tool (SF). Select the face you want to split and sketch how you want the transition to occur. Now Finish Sketch and use the Paint tool (PT) to apply your patterns to the face.
Wednesday, February 15, 2006
Detail Groups
Revit Groups are like AutoCAD blocks. Draw a couple of lines and group the selection. Copy multiple instances of the group and then edit one of the grouped objects. You'll notice that the changes you made will propogate to all the other similar groups. Go to File... Save to Library... Save Group and Groups will be saved to RVG files. We use Detail Groups a number of ways.
Let's say you want to add multiple line text like revision dates to your titleblock. Just add the dates with the text tool to one of your sheets and group the new text. Copy the group (Ctrl+C). Go to another sheet. Now go to Edit... Paste Aligned... Current view and Revit will paste the text in exactly the same spot on your new sheet. Do the same for all your sheets. Now you can edit your grouped text from any sheet and the changes will propogate to all the other sheets.
Now let's say you want to build a library of Typical Details. Draft your typical detail in a Drafting View and group the selection. Go to File... Save to Library... Save Group and Groups will be saved to RVG files. At the moment there is no thumbnail viewer for RVG files so plan on creating hardcopies in a details binder or you can create Detail Project files with all your roof details in one project file. With a dedicated Detail Project file you can copy and paste drafting views from one project to another.
Update: 03/07/06
I understand Revit 9 will have a Details Library and tools for saving and reusing Drafting Views.
Let's say you want to add multiple line text like revision dates to your titleblock. Just add the dates with the text tool to one of your sheets and group the new text. Copy the group (Ctrl+C). Go to another sheet. Now go to Edit... Paste Aligned... Current view and Revit will paste the text in exactly the same spot on your new sheet. Do the same for all your sheets. Now you can edit your grouped text from any sheet and the changes will propogate to all the other sheets.
Now let's say you want to build a library of Typical Details. Draft your typical detail in a Drafting View and group the selection. Go to File... Save to Library... Save Group and Groups will be saved to RVG files. At the moment there is no thumbnail viewer for RVG files so plan on creating hardcopies in a details binder or you can create Detail Project files with all your roof details in one project file. With a dedicated Detail Project file you can copy and paste drafting views from one project to another.
Update: 03/07/06
I understand Revit 9 will have a Details Library and tools for saving and reusing Drafting Views.
Tuesday, February 14, 2006
Filled Regions
We use filled regions in a number of ways.
You'll notice right away that Revit's interior elevations look more like sections. We use a No Pattern Filled Region to crop the extents of our interior elevations. This comes in handy since crop regions can not yet be shaped the way a filled region can.
Very often sub grade basements will show in elevation when no topography model is present. Again we use a No Pattern Filled Region to "crop out" the basement walls. If you want to hide an edge of the filled region just edit the filled region and change the boundary line to Invisible lines.
You'll notice right away that Revit's interior elevations look more like sections. We use a No Pattern Filled Region to crop the extents of our interior elevations. This comes in handy since crop regions can not yet be shaped the way a filled region can.
Very often sub grade basements will show in elevation when no topography model is present. Again we use a No Pattern Filled Region to "crop out" the basement walls. If you want to hide an edge of the filled region just edit the filled region and change the boundary line to Invisible lines
Monday, February 13, 2006
Area Calculations and Illustration
Lets say you need to calculate and illustrate areas that are existing and new for instance. Go to View... New... Area Plan and select the type of area (Gross or Rentable) and the level you want to apply the area calcs to. It will then ask you if you want to automatically create area boundary lines or if you would rather draw them yourself. Make a choice then go to Drafting... Area Boundary and you can edit the area boundaries yourself. Go to Drafting... Area Tag and you can tag each area in much the same way that you would tag rooms.
After you have your boundaries and tags placed go to Drafting... Color Fill and drop a color fill legend onto the view. You can now select the color fill legend and Edit Color Scheme to show areas by SF, Type, Name, or Perimeter.
Go to View... New... Schedule and you'll notice that you can now schedule your Gross and Rentable Areas.
After you have your boundaries and tags placed go to Drafting... Color Fill and drop a color fill legend onto the view. You can now select the color fill legend and Edit Color Scheme to show areas by SF, Type, Name, or Perimeter.
Go to View... New... Schedule and you'll notice that you can now schedule your Gross and Rentable Areas.
Friday, February 10, 2006
Changing Family Categories
Let's say you started to create a storefront (with door) using the door family template and now you want it to schedule as a window instead. While in the family editor go to Settings... Family Category and Parameters... and just switch to another compatible family. Now when you import your storefront it will schedule with all the other windows.
Thursday, February 09, 2006
Rotate Model Patterns
Do you want to rotate a model pattern that you've applied to a surface?
Place your mouse over any line of the pattern and TAB through until the line you want is highlighted. Then just use the rotate command.
You can not rotate Drafting patterns by this method.
Place your mouse over any line of the pattern and TAB through until the line you want is highlighted. Then just use the rotate command.
You can not rotate Drafting patterns by this method.
Wednesday, February 08, 2006
Conical Roofs
We found this feature very useful. If you want a conical or octagonal roof select Roof By Footprint and draw a circle. Select the sketch and change its Number of Full Segments under Properties to 0 or 8. You can play around with the number of segments to see how it reacts.
Subscribe to:
Posts (Atom)